Product catalogPleatTailoring in steelReservations openReserve a build slotReserve
Pleat cupboard in Reseda: green pleated doors, salmon-orange slot and sillPleat cupboard in Reseda: green pleated doors, salmon-orange slot and sill

Tailoring in steel.

Pleat is a two-door cupboard in powder-coated sheet steel: pleated doors, a coloured lining, and screws worn like buttons. It is made only by laser cutting, bending and screwing, in batches of 25.

€1,690planned price, incl. VAT, plus delivery

Reserve a build slot

Reserving is free and non-binding. Once 25 slots are reserved, orders open for the first batch.

Every feature is a fold.

Most sheet-metal furniture hides how it is made: welded, ground and filled until it looks like a plain box. Pleat has no welding to hide, so it does the opposite. Every feature is a fold, and every joint is a screw you are allowed to see.

Close-up of the pleated door

Pleats

Each door is one sheet folded into eight vertical pleats. The folds stiffen 1 mm steel and give the front its light and shadow.

The slot between the doors, lined in salmon orange

Lining

Outside one colour, inside another. The lining shows on the front in two places only: the slot between the doors, which is also the handle, and the sill beneath them.

Screws along the lid brim of the side panel

Buttons

No handles, no visible hinges. The only fasteners you see are six stainless screws on each side, in two straight rows.

Made for rooms, not workshops.

Pleat should feel precise, light and friendly: at home in a hallway, a living room or a studio. It must not look or sound like a locker.

A bright living room with Pleat in Reseda between a monstera and a cane chair
Reseda in a bright living room
Pleat in Reseda with morning sun across the pleated doors, a print and books on the lid
Reseda in the morning sun
Close-up of the pleated doors and the salmon-orange slot in sunlight
Light and shadow on the pleats
Pleat in Oyster with an ultramarine lining, one door open, in a hallway with a terracotta wall
Oyster in a hallway
Pleat in Oxide with a light-pink sill in warm evening light, next to a cane chair
Oxide in the evening light

One sheet, nineteen folds

Scroll to build it.

The doorOne sheet of steel1 mm thick, laser cut

One sheet, nineteen folds

One sheet of steel. 1 mm thick, laser cut
Nineteen folds. Eight pleats, a hem for the hand, no weld
Powder coated. Every part on its own: no masking between colours
Sixteen tongues hold every pleat. A rail caps each end, a stile ties them. Four screws.
Twenty-one folded parts. Laser cut, bent and screwed together
Pleat in Reseda with both doors open: lever-arch files, books, bowls and a basket on the salmon-orange shelves

Room inside

Two full-width shelves hook into slotted liners every 50 mm: lift, slide, hook, with no tools and no loose pins. A4 lever-arch files stand upright on two levels. The doors open to 120° and close on four magnets; the hinges are pivot pins hidden in the door rails.

Clear space
863 × 340 × 950 mm
Each shelf
25 kg
Shelf steps
50 mm

Three colourways

Every Pleat has two colours: a shell for everything you see when it is closed, and a lining for everything inside.

Pleat in Oxide, Reseda and Oyster side by side

Reseda. The old machine-tool green. On a pleated front it reads more like fabric than workshop. Screen colours are approximate. The RAL chip is the reference.

No welding. Nothing hidden.

Twenty-one sheet parts from a laser, a press brake and a screwdriver. Every part is powder-coated on its own, so the second colour needs no masking. Pleat ships flat in two boxes, and one person puts it together with 26 screws in about 40 minutes.

The 150 mm gap underneath stays open from front to back, and the lining on the underside throws a soft coloured reflection on a light floor.

Exploded view of all Pleat parts

The film

How Pleat is made, from one flat sheet to three colourways.

Specifications

From the CAD model, revision D.

Outer size W × D × H
900 × 400 × 1150 mm
Clear storage W × D × H
863 × 340 × 950 mm
Weight
About 57 kg, powder-coated
Material
Sheet steel, 1.5 and 1.0 mm
Finish
Powder coat, fine texture, matt, in a shell and a lining colour
Doors
Two, eight pleats each, open to 120°, magnetic catch
Shelves
Two, adjustable in 50 mm steps, 25 kg each
Fasteners
26 screws, stainless M5 button heads outside, no welding, no glue
Delivery
Flat, two boxes of 1180 × 930 mm, about 29 and 27 kg
Assembly
One person, about 40 minutes, illustrated guide
Wall fixing
Two points at the top of the back panel
Price
€1,690 planned, incl. VAT, plus delivery
Pleat
Design
engineer your idea
Drawing
PL-00
Revision
D
Parts
21 sheet, 15 patterns
Date
2026-11-13

Reserve a build slot

Pleat is made in batches of 25, so that every cupboard goes to someone who wants it. Your reservation helps the first batch happen and puts you in line for it.

First batchBe one of the first 25.
  1. Reserve for free

    Leave your email and, if you like, your colourway. Click the link we send you and you get a numbered build slot.

  2. The batch fills up

    Once 25 slots are reserved, we confirm the final price and the lead time and offer the slots in order.

  3. You decide

    Order, or let your slot go. When the batch is ordered, it goes into production.

And if the batch doesn't fill?

Then it simply isn't made yet. Nobody pays anything, we tell you how it went, and you can keep your slot for a later batch.

Reservation terms in plain words
Free.
A reservation costs nothing, and we do not ask for payment details.
Not a purchase.
Neither you nor we are bound by it. A purchase contract only comes about through a separate order at the final price, with all statutory information and your right of withdrawal.
In order.
Slots are numbered in the order they are confirmed and offered in that order once orders open. If you do not answer within 14 days of our offer, the slot passes to the next person.
Price.
The planned price is €1,690 including VAT, plus delivery. We confirm the final price before the first batch is made. Lead time and launch date are still open, and details of the design may change.
If the batch doesn't fill.
A batch is only made when enough cupboards are ordered. If that doesn't happen, nobody pays anything and we tell you; you can keep your slot for a later batch. If Pleat is not produced at all, we delete your data.
Cancel any time.
Every email has a link that cancels your reservation.
Your data.
We keep your email and the preferences you chose for this reservation and the launch only, and delete them after the launch or when you cancel.
Colourway (optional)
How many (optional)
For (optional)

We use your address only for this reservation. Privacy policy

Questions

What will it cost?

The planned price is €1,690 including 19 % VAT (about €1,420 net for businesses), plus delivery. We confirm the final price before the first batch is made.

What does delivery cost?

Pleat ships in two flat boxes of 1180 × 930 mm. They are too big for parcel services, so it travels by freight carrier. We quote delivery to your region together with the final price.

What if not enough people reserve?

Then the batch simply isn't made yet. Nobody pays anything, we tell you how it went, and your slot stays yours for a later batch if you like. Every reservation helps the first batch happen.

When will it ship?

Once a batch of 25 is ordered, a sheet-metal job shop cuts, bends and coats it. You get the lead time with your order offer.

How hard is it to put together?

It ships flat in two boxes. One person needs about 40 minutes and 26 screws, with an illustrated assembly guide. The shelves and the centre post go in without tools.

Can I get another size or colour?

The model is fully parametric, so another width, depth or height is a matter of a few values and a new set of cut files. Other RAL colours are possible too. Write to us.

Will there be a Kickstarter?

Maybe. If we launch Pleat through a crowdfunding campaign, reservation holders hear about it before it goes public.

Where do you deliver?

Tell us your country in the form. We plan the delivery regions from the reservations.

Who is behind Pleat?

Anton Steenken, a hardware engineer in Hamburg. He designs products for clients at engineer your idea; Pleat is his own.

Why does an engineering studio make a cupboard?

Because it shows what we do. engineer your idea takes products from a first brief to a design that a factory can make. Pleat went through exactly that process, so you can see the result instead of reading about it.

Want to build your own product?

Pleat went from a two-page brief to a parametric model, fifteen flat patterns, bend simulations, drawings and a complete manufacturing package. That is what engineer your idea does for clients: from your idea to a product a factory can make. Tell us about yours in a free 10-minute call.

Our CAD design service